Works for me!
Here ya go!
1875.png
 
The arms of Neuburg-Medici house which are the arms of Johan Wilhelm as Elector Palatine impaled with the arms of Tuscany under the Medici.
The arms of the Medici impaled with those of the Neuburg Palatine electors without the inestucheon, two helms, the dexter one with the electoral crown and the sinister one with the Tuscan crown.
Better late than never, here's your third request:
CoA_Neuburg-Medici_for-Guatemalan-Nat-Syng_FGv1.png (as always, click the thumbnail for the full-size image)
You asked for the Tuscan crown to be closed. I made it only single-arched, as otherwise the fleur-de-lys design at the front kind of disappeared. Hope that's okay.
Image(s) created by FriendlyGhost using inkscape and/or paint.net.
In accordance with the attribution terms of the licences noted below, you are free to use this image, including adaptation, as long as you give attribution (in case of a conflict, the most limiting licence applies). On this site (alternatehistory.com), just @ my username. On other sites, link to my profile page here, where a message would also be nice, so I can see where my images are used.
Some of the constituent parts of this image were amended from publicly available images, as follows:
(1) Dexter part of shield largely from CoA of Johann Wilhelm as Elector Palatine by Heralder, free for use and adaptation under the CC BY-SA 3.0 licence; partially recoloured, inescutcheon removed. Dexter crown adapted from same; inner/rear section at base removed.
(2) Sinister part of shield adapted from Arms of Medici also by Heralder, free for use and adaptation under the CC BY-SA 3.0 licence; partially recoloured.
(3) Sinister crown from combination of:
(a) crown from CoA of Grand Duchy of Tuscany by F_l_a_n_k_e_r, free for use and adaptation under the CC BY-SA 3.0 licence; inner/rear section at base removed; and
(b) parts of crown from Royal CoA of the Netherlands by Sodacan, free for use and adaptation under the CC BY-SA 3.0 licence; main parts of crown removed leaving only left and right arches plus top orb and cross, recoloured.
(4) Helms adapted from Royal Coat of Arms of the UK also by Sodacan, free for use and adaptation under the CC BY-SA 3.0, 2.5, 2.0 and 1.0 licences; recoloured and cropped to lie behind shield.
Colour matching, resizing, cropping and positioning all by me.

Licence details:
Creative Commons
CC BY-SA 3.0: Attribution-Share Alike 3.0 Unported
CC BY-SA 2.5: Attribution-Share Alike 2.5 Generic
CC BY-SA 2.0: Attribution-Share Alike 2.0 Generic
CC BY-SA 1.0: Attribution-Share Alike 1.0 Generic
Details of applicability/compatibility of each licence
 
Better late than never, here's your third request:
View attachment 638318 (as always, click the thumbnail for the full-size image)
You asked for the Tuscan crown to be closed. I made it only single-arched, as otherwise the fleur-de-lys design at the front kind of disappeared. Hope that's okay.
Image(s) created by FriendlyGhost using inkscape and/or paint.net.
In accordance with the attribution terms of the licences noted below, you are free to use this image, including adaptation, as long as you give attribution (in case of a conflict, the most limiting licence applies). On this site (alternatehistory.com), just @ my username. On other sites, link to my profile page here, where a message would also be nice, so I can see where my images are used.
Some of the constituent parts of this image were amended from publicly available images, as follows:
(1) Dexter part of shield largely from CoA of Johann Wilhelm as Elector Palatine by Heralder, free for use and adaptation under the CC BY-SA 3.0 licence; partially recoloured, inescutcheon removed. Dexter crown adapted from same; inner/rear section at base removed.
(2) Sinister part of shield adapted from Arms of Medici also by Heralder, free for use and adaptation under the CC BY-SA 3.0 licence; partially recoloured.
(3) Sinister crown from combination of:
(a) crown from CoA of Grand Duchy of Tuscany by F_l_a_n_k_e_r, free for use and adaptation under the CC BY-SA 3.0 licence; inner/rear section at base removed; and
(b) parts of crown from Royal CoA of the Netherlands by Sodacan, free for use and adaptation under the CC BY-SA 3.0 licence; main parts of crown removed leaving only left and right arches plus top orb and cross, recoloured.
(4) Helms adapted from Royal Coat of Arms of the UK also by Sodacan, free for use and adaptation under the CC BY-SA 3.0, 2.5, 2.0 and 1.0 licences; recoloured and cropped to lie behind shield.
Colour matching, resizing, cropping and positioning all by me.

Licence details:
Creative Commons
CC BY-SA 3.0: Attribution-Share Alike 3.0 Unported
CC BY-SA 2.5: Attribution-Share Alike 2.5 Generic
CC BY-SA 2.0: Attribution-Share Alike 2.0 Generic
CC BY-SA 1.0: Attribution-Share Alike 1.0 Generic
Details of applicability/compatibility of each licence
04311B0E-2C2B-461C-8C70-537A9940415F.jpeg
 
Can someone please help me with making a map for my TL, at the in-TL period of 565AD? Link is down below.

Hey guys, not looking to rush, but has anyone taken my request?
 
That is nice but can you make the spanish part of the flag into its correct proportions?
Okay. Here's two options: one with the CoA smaller so that all three stripes are the same height as the CoA, one with the CoA the same size as before and the central stripe made narrower.
Flag_Iberian-Union_for-Joriz-Castillo_FGv2.png Flag_Iberian-Union_for-Joriz-Castillo_FGv3.png (click the thumbnails for the full-size images)
I think the second one's better and probably what you want, but the first one's there just in case you prefer it.

Edit: see post below for these with thin gold stripes to separate the green from the red/purple.
 
Last edited:
Okay. Here's two options: one with the CoA smaller so that all three stripes are the same height as the CoA, one with the CoA the same size as before and the central stripe made narrower.
View attachment 638784 View attachment 638785 (click the thumbnails for the full-size images)
I think the second one's better and probably what you want, but the first one's there just in case you prefer it.
I think the green part would bleed into the purple one while flapping. I would suggest putting a thin yellow / gold vertical stripe between the green section and the red and purple stripes.
 
Top